How To: Can-Am X3 Half Windshield With Intrusion Bars

You Can mount a Half Windshield on a Can-Am X3 with Intrusion Bars.  You need about $20 in parts and 10 minutes of time.  This is a very simple project to allow you to mount a half windshield for the summer and even allow you to mount a full windshield later without removing what you need to mount your half windshield again.

While mounting our Dragonfire Racing Intrusion Bars, the directions said a full windshield will work, but not a half windshield.  We want to be able to use both, so with some parts we had around the shop we were easily able to make a half windshield work.  The video above shows how we did it with ease.  Below are the parts you would need if you do not have them sitting around.

Parts Needed:

House Tuning Light Bar Clamp Mount Bracket https://amzn.to/2G6KT5z
1/4-20 x 3/8″ Button Head Socket Cap Screw https://amzn.to/2Gal3gH